The ultimate waterproofing solution
TRITOFLEX™ 2K: INSTANT-SET
TRITOFLEX™ 2K is an instant-setting liquid rubber membrane used worldwide for roofing, waterproofing, and corrosion protection. It is water-based, non-toxic, and forms an extremely flexible, yet tough, membrane that is sprayed to any thickness in a single pass. It results in a lightweight, seamless rubber membrane with no waste that is easily repaired and can be renewed indefinitely.
TRITOFLEX 2K was engineered as a stronger and safer alternative to wasteful, disruptive, and costly roof tear-offs. Beyond restoring and recovering existing roofs, it is also used for waterproofing decks, foundations, walls, containment pits, and much more. TRITOFLEX 2K is a FM-Approved roof recover product, achieving the highest test results in the industry. Our list of other certifications include: Florida Building Code, Texas Department of Insurance,
CodeMark (New Zealand), SABS (South Africa), JIS (Japan), EOTA (Europe), and more.
| TECHNICAL FEATURES |
|---|
| > 1,200% elongation (aged result) |
| >600 psi tensile strength (aged result) |
| Class A Fire Rating, self-extinguishing |
| Resistant to severe, baseball-sized hail |
| Impermeable – withstands ponding water indefinitely |
| Sprayed to any thickness in 1 coat |
| Instantly rain-resistant |
| Resistant to acids, salts, and more |
TritoFlex 2K is an Applicator only product. Only our Certified Applicators can install this product.
TRITOFLEX™ 1K: BRUSH/SPRAY
Tired of traditional asphalt mastics and butter-grade products that don’t last long? TRITOFLEX 1K Rubber is your answer.
TRITOFLEX™ 1K SYNTHETIC RUBBER is an industrial-grade, liquid-applied, single-component waterproofing membrane that is non-toxic and water-based. TRITOFLEX 1K has the same physical properties as TRITOFLEX 2K, simply made into other viscosities to be applied with an airless sprayer, roller, or brush. TRITOFLEX 1K was engineered as a stronger, safer alternative for roof repairs, roof restoration, waterproofing, and anti-corrosion coating.
TRITOFLEX 1K B (Brush-Grade) is used as a patch and flashing component of the TRITOFLEX roof recover and restoration system, but is also used extensively by professional contractors as a roof repair product. It is ideal for sealing leaking roof penetrations, ductwork seams, cracks, tears, punctures, and more. Beyond roofing, it is utilized for small waterproofing projects. TRITOFLEX 1K B is available in 2-Gal (8L) and 5-Gal (19L) buckets.
TRITOFLEX 1K S (Spray-Grade) can be applied with conventional airless sprayers and utilized for roof restoration, waterproofing, and anti-corrosion. It is available for purchase in 5-Gal (19L) buckets, 50-Gal (190L) drums, or 264-Gal (1,000L) totes.
| TECHNICAL FEATURES |
|---|
| 1,200% elongation (aged result) |
| 98% recovery (bounces back after stretch) |
| >650 psi tensile strength (aged result) |
| Class A Fire Rating, self-extinguishing |
| Impermeable – withstands ponding water indefinitely |
| Can be applied up to 80 mils (2 mm) wet in one coat |
| Zero VOC’s, water-based, odor-free |
| Chemical resistance to acids, salts, and more |
| Manufactured from 20% post-consumer recycled content |
For 'New builds' or 'Council Consents' TritoFlex 1K will need to be installed by one of our Certified Applicators.
ALL-WEATHER ROOF PATCH
This brush-grade rubber mastic was initially created as an emergency solution for roof repairs in unfavourable weather when TritoFlex is not feasible. However, it has proven to be a valuable addition to any toolkit due to its durability and versatility. It is specially designed to address a range of issues, including flashings, seams, cracks, punctures, and more, no matter the weather conditions. Making it an ideal choice for long-lasting repairs.
What sets AW Roof Patch apart is its unparalleled versatility - it can be applied in freezing temperatures or wet conditions, making it the go-to for emergency repairs. It can even be applied underwater! This water-free rubber mastic remains flexible even in the coldest conditions, ensuring it won't crack. And with the ability to be applied thickly in just one coat, AW Roof Patch saves you time and effort.
Whether you're a homeowner dealing with small-scale waterproofing issues or a professional in the construction, roofing, or plumbing industry, AW Roof Patch is the perfect solution.
| PHYSICAL PROPERTIES | (CURED FORM) |
|---|---|
| Colour | Grey |
| Water Vapour Transmission | 0.25 Perms |
| Elongation | 850% |
| Tensile Strength | 600psi |
| Peel Adhesion | 4.3 pli min |
| Service Temperature | -40 º to 60º C |
| Weathering | Excellent |
| Dry Time (23º C, 50% RH) | 12 hours |
| Tack Free Time | 1 hour |
How can we help?
If you need help or advice on waterproofing, feel free to contact us by phone or email. You can also send us a message below and we'll get back to you quickly.
Or if you're interested in becoming a certified applicator,
click here.
